Flexispot Alcove Riser Standing Desk Converter M17 review: a satisfyingly simple standing desk converter that can hold the weight, as long as you can help lift it
The Flexispot Alcove Riser Standing Desk Converter M17 is a standing desk converter that’s simple to set up and proves useful, although it won’t win any awards for its weight lifting capabilities.
In my opinion, any Best Standing Desk Converters Should be a good option for those who want the flexibility to change things up during the workday but don’t have the space and/or budget to go all out with a traditional standing desk.
The Flexispot Alcove Riser Standing Desk Converter M17 is priced at £169.99 on the Flexispot website, at Amazon. Size M appears to be the only size available for purchase at the time of writing, measuring approximately 915 x 633 x 120-510mm and weighing approximately 21.7kg.
Flexispot Alcove Riser Standing Desk Converter M17: Unboxing and Assembly
After opening the shipping box I found the components to be in good condition with no damage to the metalwork or tabletop and tray, although I did notice some minor cosmetic issues after the first few days of use, namely some areas around the top edge where the white paint on the tabletop was not completely Cover with MDF underneath.
Specification
desktop:About. 915 x 415 mm
high scope:120-510mm
Lifting capacity: 3-15kg desktop. 2kg keyboard tray.
Leg shape: Height-adjustable X frame
I was pleased to find that there was very little assembly required, as the Flexispot Alcove Riser Standing Desk Converter M17 consists of just two parts: the main desktop with folding X-frame legs and the keyboard tray. Assembly only took a few minutes as I just had to attach the keyboard tray to some bolts to secure it under the desk and then the job was done, much easier than many others. Best standing desk There.
The easy way to mount the keyboard tray came in handy since I needed to disassemble it again after taking photos and bring it to my office. As I’m 5’2″ and quite petite, I had to get some help to carry the packed converter and then the main body of the table, so it’s worth remembering that the table top and attached frame will contribute to the bulk of the 21.7kg weight section, so you may need help if you’re not used to maneuvering heavy objects.
Flexispot Alcove Riser Standing Desk Converter M17: First Impressions and Build Quality
As mentioned, my first impression was positive due to the super easy assembly. The materials and finishes look good, and the riser mechanism works well – although this is before anything is placed on the desk. The medium-sized desktop converter I tested can support 15kg on the desktop and 2kg on the keyboard tray, which sounds good for the size.
Since I have a fairly wide desk in my office, almost a meter and a half wide, I have enough room for the Flexispot Alcove Riser Standing Desk Converter M17, but with a width of around 915mm, I bet it would fit Most office desks. Once in place, the white converter looks like it belongs there because it blends in with my white table. So far in my brief testing, I’m very pleased with the quality, aesthetics, and performance. My next step is to evaluate its long-term performance in daily use.
Flexispot Alcove Riser Standing Desk Converter M17: in use
While my desk is usually cluttered, I manage to keep only the essentials on the Flexispot Alcove Riser Standing Desk Converter M17, including my 24-inch monitor, 13-inch Macbook Air, keyboard, mouse, laptop, and a cup of coffee (a cup of coffee) . course). Although still well below the desk converter’s maximum weight capacity, some manual assistance is required when adjusting it to standing height.
This desk converter can be lifted up without much pressure due to the pull handle on the lower right side of the desktop, so it’s easy to prepare for height conversions. While the Flexispot Alcove Riser Standing Desk Converter M17 didn’t feel like it was tipping over after I raised it to a comfortable standing height, it did when typing on the keyboard and putting a little weight on it while reaching. There will be a noticeable bounce for my mouse. My monitor is intentionally placed on the back of my desk to ensure good weight distribution, but the desk converter still rocks if I apply any pressure to the front of the desk.
The gas lift mechanism could be improved to make the lifting process easier, especially for users with reduced strength like me. So keep that in mind, especially if you like using dual monitors or keeping a bottle of water on your desk, because you have to be prepared to help maneuver some weight. When it came to lowering it, which was naturally much easier, I found myself holding onto the keyboard tray each time to control how fast it went down, but it wasn’t worryingly fast.
Another point to mention is that you have to be careful not to get your fingers caught between the keyboard tray and the table when lowering to sitting height. Flexispot comes with four cable management accessories with the desktop converter, namely two white zip ties and two black Velcro straps. The white zip ties are helpful, but I need to purchase some stick-on cable clips to keep cable management organized.
property | notes | grade |
---|---|---|
design | Simple and functional, but disappointing with the poor paint job. | ⭐⭐⭐ |
Material quality | The materials feel solid and the price is acceptable. | ⭐⭐⭐⭐ |
assembly | Besides being heavier, it’s easy to put together since there are only two parts. | ⭐⭐⭐⭐⭐ |
Easy to use | The lifting process is simple but should have better air lift as it doesn’t rise easily. | ⭐⭐⭐ |
Practicality | Plenty of room for a MacBook and monitor. Keyboard tray fits full-size keyboard and mouse. | ⭐⭐⭐⭐ |
price | This is a low-cost alternative to a full standing desk, but there are similar, cheaper solutions. | ⭐⭐⭐ |
Flexispot Alcove Riser Standing Desk Converter M17: Final Verdict
I have mixed feelings about the Flexispot Alcove Riser Standing Desk Converter M17. On the one hand, it’s affordable, convenient, and looks good, but on the other, it’s hard to lift, heavy, and a little wobbly.
Despite some jitter, I didn’t find the Flexispot Alcove Riser Standing Desk Converter M17 to be unstable at any point—the wobble can prove annoying while standing and typing. Two other minor issues are the lack of paint, which ruins the aesthetics, and the disappointing cable management accessories, although I didn’t expect anything amazing for the price, and various cable management solutions are easy to find on Amazon.
Complete your workspace setup – we’ll review it best office chair